Correlation analysis and benchmark dose study on bone metabolic biochemical index of low doses of exposed hydrogen fluoride workers / 中华劳动卫生职业病杂志

Objective: To analyze correlation of occupational hydrogen fluoride exposure to low doses of bone metabolism index through occupational epidemiological investigation and benchmark dose calculation. Methods: In May 2021, using cluster sampling method, 237 workers exposed to hydrogen fluoride in a company were selected as the contact group, and 83 workers not exposed to hydrogen fluoride in an electronics production company were selected as the control group. The external exposure dose and urinary fluoride concentration, blood and urine biochemical indicators of the workers was measured.The relationship between external dose and internal dose of hydrogen fluoride was analyzed. The external dose, urinary fluoride was used as exposure biomarkers, while serum osteocalcin (BGP), serum alkaline phosphatase (AKP) and urinary hydroxyproline (HYP) were used as effect biomarkers for bone metabolism of hydrogen fluoride exposure. The benchmark dose calculation software (BMDS1.3.2) was used to calculate benchmark dose (BMD) . Results: Urine fluoride concentration in the contact group was correlated with creatinine-adjusted urine fluoride concentration (r=0.69, P=0.001). There was no significant correlation between the external dose of hydrogen fluoride and urine fluoride in the contact group (r=0.03, P=0.132). The concentrations of urine fluoride in the contact group and the control group were (0.81±0.61) and (0.45±0.14) mg/L, respectively, and the difference between the two groups was statistically significant (t=5.01, P=0.025). Using BGP, AKP and HYP as effect indexes, the urinary BMDL-05 values were 1.28, 1.47 and 1.08 mg/L, respectively. Conclusion: Urinary fluoride can sensitively reflect the changes in the effect indexes of biochemical indexes of bone metabolism. BGP and HYP can be used as early sensitive effect indexes of occupational hydrogen fluoride exposure.

Epidemiological characteristics and treatment outcome analysis of 229 patients with hydrofluoric acid burns in hands / 中华烧伤杂志

Objective: To explore the epidemiological characteristics and treatment outcomes of patients with hydrofluoric acid burns in hands. Methods: A retrospective observational study was conducted. The medical records of 229 patients with hydrofluoric acid burns in hands who were admitted to Zhejiang Quhua Hospital from January 2008 to December 2020 and met the inclusion criteria were collected. The following statistical data of patients were collected, including gender, age, type of affiliated enterprise, hydrofluoric acid mass fraction, injury site, total burn area, prehospital time, length of hospital stay, length of wound healing, whether hypocalcemia and hypomagnesemia occurred or not on admission, whether surgery intervention was performed or not, and whether scar sequelae occurred or not. Single factor and multivariate logistic regression analysis were used to screen out the risk factors impacting surgery intervention and scar sequelae of all the patients and patients whose hydrofluoric acid mass fraction was known. Single factor and multivariate linear regression analysis were used to screen out the risk factors impacting the length of wound healing of all the patients and patients whose hydrofluoric acid mass fraction was known. Results: The 229 patients included 206 males and 23 females, with the majority aged 30 to 50 years (139 patients). The type of affiliated enterprise of majority patients was non-fluorine chemical enterprise. The hydrofluoric acid mass fraction was known in only 91 patients, mainly medium. The majority injury site was in the middle and end of finger. The total burn area was below or equal to 1% total body surface area. The prehospital time was 19 (9, 29) h. The length of hospital stay was 2 (1, 7) d. The length of wound healing was 12 (8, 18) d. The proportions of hypocalcemia and hypomagnesemia were 0.9% (2/229) and 1.3% (3/229) on admission, respectively. Thirty-six patients had surgeries and 83 patients had scar sequelae. In 229 patients, single factor logistic regression analysis showed that both type of affiliated enterprise and prehospital time were the factors impacting surgery intervention (with odds ratio values of 7.86 and 51.35, respectively, 95% confidence intervals of 1.83-33.76 and 11.89-221.78, respectively, P<0.01) and scar sequelae of patients (with odds ratio values of 3.62 and 27.40, respectively, 95% confidence intervals of 1.76-7.43 and 13.25-56.68, respectively, P<0.01); multivariate logistic regression analysis showed that prehospital time was the independent risks factor impacting surgery intervention and scar sequelae of patients (with odds ratio values of 43.00 and 24.55, respectively, 95% confidence intervals of 9.89-187.03 and 11.78-51.16, respectively, P<0.01); single factor linear regression analysis showed that both type of affiliated enterprise and prehospital time were the factors impacting the length of wound healing of patients (with β values of 6.16 and 12.83, respectively, 95% confidence intervals of 3.38-8.93 and 10.72-14.93, respectively, P<0.01); multivariate linear regression analysis showed that both type of affiliated enterprise and prehospital time were the independent risk factors impacting the length of wound healing of patients (with β values of 2.81 and 12.16, respectively, 95% confidence intervals of 0.50-5.13 and 10.00-14.31, respectively, P<0.05 or P<0.01). In 91 patients whose hydrofluoric acid mass fraction was known, single factor logistic regression analysis showed that type of affiliated enterprise, hydrofluoric acid mass fraction (low and high), and prehospital time were all the factors impacting surgery intervention of patients (with odds ratio values of 9.10, 11.25, 10.69, and 0.04, respectively, 95% confidence intervals of 1.15-72.25, 1.39-90.93, 1.32-86.59, and 0.01-0.19, respectively, P<0.05 or P<0.01), type of affiliated enterprise, hydrofluoric acid mass fraction, and prehospital time were all the factors impacting scar sequelae of patients (with odds ratio values of 0.32, 0.21, and 36.80, respectively, 95% confidence intervals of 0.11-0.92, 0.06-0.73, and 11.03-122.79, respectively, P<0.05 or P<0.01); multivariate logistic regression analysis showed that both hydrofluoric acid mass fraction and prehospital time were the independent risk factors impacting surgery intervention of patients (with odds ratio values of 11.51 and 0.04, respectively, 95% confidence intervals of 1.22-108.26 and 0.01-0.25, respectively, P<0.05 or P<0.01), prehospital time was the independent risk factor impacting scar sequelae of patients (odds ratio=37.71, with 95% confidence interval of 9.97-142.69, P<0.01); single factor linear regression analysis showed that type of affiliated enterprise, hydrofluoric acid mass fraction (low and high), and prehospital time were all the factors impacting the length of wound healing of patients (with β values of 7.12, -5.63, -9.74, and 13.50, respectively, 95% confidence intervals of 2.43-11.81, -10.59--0.68, -14.78--4.70, and 10.14-16.86, respectively, P<0.05 or P<0.01); multivariate linear regression analysis showed that both hydrofluoric acid mass fraction and prehospital time were the independent risk factors impacting the length of wound healing of patients (with β values of -5.84 and 0.09, respectively, 95% confidence intervals of -10.59--1.08 and 0.05-0.12, respectively, P<0.05 or P<0.01). Conclusions: The majority of patients with hydrofluoric acid burns in hands are young and middle-aged males. Type of affiliated enterprise, hydrofluoric acid mass fraction and prehospital time are the risk factors that affect the treatment outcomes of patients with hydrofluoric acid burns in hands.

Study on the diffusion of hydrogen fluoride in an electrolytic fluoride plant based on CFD numerical simulation method / 中华劳动卫生职业病杂志

Objective: Using CFD technology to grasp the distribution and diffusion of hydrogen fluoride in an electrolytic fluorine plant, provide guidance and scientific basis for enterprises to carry out occupational health management in enterprises, install hazardous substance alarm devices, and protect workers' occupational health. Methods: In July 2019, the diffusion law of hydrogen fluoride gas produced in an electrolytic fluorine plant is selected as the research object. Through the establishment of models and grids, the Fluent numerical simulation method is finally used to simulate the diffusion and distribution of hydrogen fluoride gas under ventilation conditions. Results: The results showed that the average concentration of hydrogen fluoride was 0.045 mg/m(3) in the workplace, and the absorbed zone height (1.5 m) was 0.02 mg/m(3) in the inspection channel, which was in accordance with the national standard. However, there is eddy current above the electrolyzer near the inlet, may lead to the accumulation of hydrogen fluoride gas. Conclusion: The research of CFD numerical simulation method on the distribution and diffusion of hydrogen fluoride concentration in electrolytic fluorine plant can be applied to the prevention, control and management of occupational hazards in electrolytic fluorine plant.

Surface treatment and adhesion approaches on polymer-infiltrated ceramic network: influence on the bond strength to resin cement

Aim: To evaluate the effect of different surface treatments and adhesive approaches on the microshear bond strength of resin cement to a polymer-infiltrated ceramic network (PICN). Methods: PICN blocks were randomly assigned into 9 groups (n=10): CTRL: no treatment; HF: 5% hydrofluoric acid etching; HF-S: HF + silane; HF-S-A: HF-S + adhesive (Adper Single Bond 2); HF-UA: HF + universal adhesive (Single Bond Universal); SB: sandblasting with 50 µm Al2O3 particles; SB-S: SB + silane; SB-S-A: SB-S + adhesive; SB-UA: SB + universal adhesive. Resin cement microcylinders (Ø = 0.96 mm; height = 1 mm) (RelyX Ultimate) were built upon the PICN surface after roughness and contact angle measurements. Next, microshear bonding tests (µSBS) were performed (0.5 mm/min) after water storage (37ºC, 90 days) and thermocycling (12,000 cycles; 5ºC-55ºC). Failure modes were observed under stereomicroscope. Bond strength data were analyzed by two-way ANOVA/Tukey's test and t-tests. Kruskal-Wallis/Dunn's tests were conducted for roughness and contact angle data (α = 0.05). Results: A rougher surface and lower contact angles were observed for Sandblasting. HF-S (18.54 ± 2.03 MPa), SB-S (19.00 ± 1.66 MPa) and SB-UA (18.07 ± 2.36 MPa) provided the highest bond strength values, followed by the other treated groups. The CTRL group resulted in lower bond strength (7.18 ± 2.34 MPa). Conclusion: Hydrofluoric acid etching followed by silane application and sandblasting followed by silane or universal adhesive are useful clinical steps to enhance bonding to PICN. Adhesive applications after HF etching have no advantages in bonding to PICN

An evaluation of the effect of different veneer materials on fracture resistance of zirconia core / Avaliação dos diferentes efeitos de materiais de revestimento na resistência à fratura do núcleo de zircônia

Objectives: this in vitro study was done to evaluate the effect of packable P60 composite and Tetric N-Ceram composite veneer material on fracture strength of zirconia cores. Material and Methods:Twenty four zirconium cores (Vita, Germany) with 0.7 mm thickness were fabricated by CAD/CAM technology and then subjected to air abrasion with 50 µm of Al2O3. Cores were randomly divided into three groups according to veneering material (group A: control group sandblasted with 50 µm Al2O3 veneered by IPS E-max Ceram porcelain, group C: sandblasted with 50 µm Al2O3, etching with hydrofluoric acid and veneered with P60 composite, group E: sandblasted with 50 µm Al2O3, etching with hydrofluoric acid and veneered with Tetric N-Ceram composite). All crowns were subjected to fracture strength test in the testing machine, with load application by steel ball indenter and 0.5 mm/min. cross head speed. Results: statistical analysis was carried out utilizing one-way ANOVA, LSD. The results of fracture strength value test showed the highest mean value was registered for group (A), and the lowest mean for group (E). One-way ANOVA test represented that, there was a statistically high significant different among all groups. LSD results showed a high significant difference increase in fracture resistance for Group A at p value (*p < 0.001 High significant). Conclusions: Within the limitation of this study, sandblasting zirconia core with 50 µm Al2O3 and veneering with conventional ceramic produced restoration with acceptable fracture resistance value (AU)

Objetivo: o objetivo desse estudo in vitro foi avaliar o efeito dos compósitos P60 compactáveis e material laminado de compósitos Tetric-N Ceram na resistência à fratura de núcleos de zircônia. Material e métodos:Vinte e quatro núcleos de zircônia (Vita, Germany) com 0.7 mm de espessura fabricados por tecnologia de CAD/CAM e sinterizados em alta temperatura (1450ºC por 60 min) de acordo com as instruções do fabricante. Núcleos totalmente de zircônias foram submetidos a abração com 50 µm de Al2O3. Os núcleos de zircônia foram divididos de forma randomiza em três grupos de acordo com o material de revestimento (grupo A: grupo controle jateado com 50 µm Al2O3 folheado com porcelana IPS E-max Ceram, grupo C: jateado com 50 µm Al2O3 , coberto com concentração 9,5% de ácido fluorídrico e folheado com resina composta compatível, grupo E: jateado com 50 µm Al2O3 coberto com concentração 9,5% de ácido fluorídrico e folheado com porcelana IPS E-max Ceram. Todos os espécimes (coroas) foram submetidos a teste de resistência a fratura com máquina de teste universal, essa máquina utilizou para aplicação de carga bola de aço com 6mm de diâmetro 0,5 mm/min de velocidade da cruzeta. Resultados: análise estatística foi realizada utilizando One-way ANOVA, LSD. O resultado da resistência a fratura mostra que o maior valor médio foi registrado no grupo A e a menor média para o grupo E. O resultado do teste One-Way ANOVA representaram que houve uma diferença estatisticamente alta e significante entre todos os grupos. LSD foi executada para mostrar a fonte de significância. Os resultados do LSD mostraram um aumento da diferença significativa alta na resistência à fratura para o grupo A no valor de p (p < 0.001 signicancia alta). Conclusão: Dentro das limitações desse estudo o uso convencional de jateamento com 50 µm Al2O3 e estratificação com cerâmica convencional produziu restauração com valor aceitável de resistência a fratura (AU)

Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics

Abstract The objective of this study was to evaluate the influence of hydrofluoric acid (HF) concentration, etching time, and application of phosphoric acid (PA) followed by neutralization with sodium bicarbonate on the bond strength between a feldspar ceramic and resin cement. Thus, 80 blocks (10 x 12 x 2 mm) of glass ceramic (VM - Vita Mark II - Vita Zahnfabrik) were made and randomly assigned to eight groups (n = 10) according to the factors: HF concentration (5 and 10%), etching time (60 and 120 s), and use of phosphoric acid (PA) (with and without). According to the experimental group, 37% PA (Condac, FGM) was applied after HF etching for 60s. Afterwards, samples were immersed in sodium bicarbonate for 1 min then in an ultrasonic bath in distilled water (5 min) for cleaning. After surface bonding treatment, cylinders (Ø = 2 mm; h = 2 mm) of dual resin cement (AllCem / FGM) were made in the center of each block. The samples were then stored in water (37ºC) for 90 days and submitted to the shear bond test (50 KgF, 1 mm/min). Failure analysis was performed by stereomicroscope and scanning electron microscopy. Data (MPa) were analyzed with 3-way ANOVA and Tukey's test. Only the factor "HF concentration" was significant (p = 0.02). Most failures were of cohesive in ceramic (40%) and mixed types (42.5%). The 10% HF resulted in higher shear bond strength value than the 5% HF. Surface cleaning with phosphoric acid followed by sodium bicarbonate and HF time (60 or 120 seconds) did not influence the resin bond strength to feldspar ceramic.

Efeito de diferentes tratamentos de superfície sobre a resistência de união de cerâmicas odontológicas / Effect on the bond strength of different dental ceramics surface treatments

Os objetivos deste estudo foram caracterizar a superfície das cerâmicas para sistema CAD/CAM (F-Feldspática, S-Silicato de lítio reforçado por zircônia e Z-Zircônia de média translucidez) após diferentes précondicionamentos de superfície para cimentação aplicados separadamente ou combinados; e avaliar a resistência de união por microtração (RUM) e padrões de fratura (PF) entre as cerâmicas (F, S e Z) após précondicionamentos de superfície e o cimento resinoso. Foram confeccionados 150 blocos 5x5x2(±0,5)mm para análise topográfica (n=10) e 240 blocos (5×5×6(±0,5)mm) (n=8) para análise da resistência de união, divididos em 05 grupos de acordo com tipo de cerâmica, pré-condicionamento de superfície e testes realizados: (AF) condicionamento com ácido fluorídrico 10%; (AF+PC) condicionamento de com ácido fluorídrico 10% + aplicação de primer cerâmico universal (Monobond N); (PA) aplicação de primer cerâmico autocondicionante de passo único (Monobond Etch & Prime); (JT+PA) jateamento com Al2O3 revestido por SiO2 (CoJet™) + aplicação de primer cerâmico autocondicionante de passo único e (JT+PC) jateamento com Al2O3 revestido por SiO2 (CoJet™) + aplicação de PC. As análises topográficas foram realizadas após os diferentes pré-condicionamentos. A RUM e padrão de fratura foram realizadas após 24 horas de armazenagem em água ou após termociclagem. Para as análises topográficas, foi realizado a análise de variância (ANOVA - dois fatores) seguido pelo teste de Tukey (α = 0,05). Para o teste de RUM a estatística foi realizada pela análise de variância (ANOVA para medidas repetidas) sob três fatores e teste de Bonferroni (α = 0,05). Os pré-condicionamentos de superfície que usaram a combinação com jateamento apresentaram maiores valores de Ra. A ELS das cerâmicas foi influenciada pelos pré-condicionamentos, aonde JT+PC apresentou os maiores valores em F e Z. A KHN alterada penas na cerâmica Z, com um aumento significativo (p<0,05) após jateamentos (JT+PC e JT+PA). Para cerâmica F, os grupos tratados com jateamento e primers (JT+PC e JT+PA) apresentaram valores de RUM superiores aos demais tratamentos. Para cerâmica à base de S com exceção do tratamento com AF isolado, que mostrou baixo valor de RUM, todos os outros préconcidionamentos apresentaram altos valores de RUM, sem diferença significante entre eles (p>0,05). Para Z de média translucidez não houve diferença significativa entre os tratamentos JT+PC e JT+PA que obtiveram os maiores valores de RUM. A termociclagem reduziuos valores de RUM, com exceção da cerâmica de S condicionada com JT+PC Quanto ao padrão de fratura, pode-se observar que em todos os grupos houve predominância de falhas adesivas (superior a 70%), independente da termociclagem. Concluise que os pré-condicionamentos influenciaram na topografia estrutural e na RUM de todas as cerâmicas. O primer cerâmico autocondicionante de passo único (PA) pode ser uma alternativa viável ao uso de Ácido fluorídrico 10% + primer cerâmico universal (AF + PC) na cerâmica feldspática (F) e, ao jateamento com Al2O3 revestido por SiO2 + primer cerâmico universal (JT + PC) na cerâmica silicato de lítio reforçado por zircônia (S) e na zircônia de média translucidez (Z)(AU)

The objectives of this study were to characterize the ceramics surface for CAD / CAM system after different surface preconditions for cementation applied separately or combined; and to evaluate the microtensile bond strength (RUM) and fracture patterns (PF) between the ceramics (F, S and Z ) after surface preconditioning and the resin cement after aging. 150 5x5x2 (± 0.5) mm blocks were made for characterization analysis (n = 10) and 240 blocks (5 × 5 × 6 (± 0.5) mm) (n = 8) for bond strength analysis, divided in 05 groups according to type of ceramic, surface preconditioning and tests performed: (AF) conditioning with 10% hydrofluoric acid; (AF + PC) conditioning with 10% hydrofluoric acid + application of universal ceramic primer (Monobond N); (PA) application of single-step self-etching ceramic primer (Monobond Etch & Prime); (JT + PA) blasting with SiO2- coated Al2O3 (CoJet ™) + application of single-step self-etching ceramic primer and (JT + PC) blasting with Al2O3 coated with SiO2 (CoJet™) + PC application The surface characterization analyzes were performed after the different preconditionings. The RUM and fracture pattern were performed after 24 hours of storage in water or after thermocycling. For topographic analysis, ANOVA (two factors) was performed followed by the Tukey test (α = 0.05). For the RUM test, statistics were performed by analysis of variance (ANOVA for repeated measures) under three factors and Bonferroni test (α = 0.05). The surface preconditions that used the combination with blasting showed higher values of Ra. The ELS of ceramics was influenced by the preconditionings, where JT + PC presented the highest values in F and Z. The altered KHN feathers in ceramic Z, with a significant increase (p <0.05) after blasting (JT + PC and JT + PA). For ceramics F, the groups JT + PC and JT + PA showed RUM values higher than the other treatments. For S with the exception of treatment with isolated AF, which showed a low RUM value, all other preconditions were found to have high RUM values, with no significant difference between them (p>0.05). For Z, there was no significant difference between the treatments JT + PC and JT + PA that obtained the highest RUM values. Thermocycling reduced the values, with the exception of S ceramics conditioned with JT + PC. Regarding the fracture pattern, it can be observed that in all groups there was a predominance of adhesive failures (over 70%), regardless of thermocycling. It is concluded that the pre-conditioning influenced the structural characterization and the RUM of all ceramics. The single-step self-etching ceramic primer (PA) can be a viable alternative to the use of 10% hydrofluoric acid + universal ceramic primer (AF + PC) in feldspar ceramic (F) and, when blasting with Al2O3 coated with SiO2 + universal ceramic primer (JT + PC) in zirconia-reinforced lithium silicate ceramics (S) and medium translucency zirconia (Z)(AU)

Effect of surface treatments and universal adhesive application on the microshear bond strength of CAD/CAM materials

PURPOSE: The aim of this study was to evaluate the microshear bond strength (µSBS) of four computer-aided design/computer-aided manufacturing (CAD/CAM) blocks repaired with composite resin using three different surface treatment protocols.MATERIALS AND METHODS: Four different CAD/CAM blocks were used in this study: (1) flexible hybrid ceramic (FHC), (2) resin nanoceramic (RNC), (c) polymer infiltrated ceramic network (PICN) and (4) feldspar ceramic (FC). All groups were further divided into four subgroups according to surface treatment: control, hydrofluoric acid etching (HF), air-borne particle abrasion with aluminum oxide (AlO), and tribochemical silica coating (TSC). After surface treatments, silane was applied to half of the specimens. Then, a silane-containing universal adhesive was applied, and specimens were repaired with a composite, Next, μSBS test was performed. Additional specimens were examined with a contact profilometer and scanning electron microscopy. The data were analyzed with ANOVA and Tukey tests.RESULTS: The findings revealed that silane application yielded higher µSBS values (P<.05). All surface treatments were showed a significant increase in µSBS values compared to the control (P<.05). For FHC and RNC, the most influential treatments were AlO and TSC (P<.05).CONCLUSION: Surface treatment is mandatory when the silane is not preferred, but the best bond strength values were obtained with the combination of surface treatment and silane application. HF provides improved bond strength when the ceramic content of material increases, whereas AlO and TSC gives improved bond strength when the composite content of material increases.

Effect of hydrofluoric acid-based etchant at an elevated temperature on the bond strength and surface topography of Y-TZP ceramics

OBJECTIVES: This study investigated the effects of a hydrofluoric acid (HA; solution of hydrogen fluoride [HF] in water)-based smart etching (SE) solution at an elevated temperature on yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramics in terms of bond strength and morphological changes.MATERIALS AND METHODS: Eighty sintered Y-TZP specimens were prepared for shear bond strength (SBS) testing. The bonding surface of the Y-TZP specimens was treated with 37% phosphoric acid etching at 20°C–25°C, 4% HA etching at 20°C–25°C, or HA-based SE at 70°C–80°C. In all groups, zirconia primers were applied to the bonding surface of Y-TZP. For each group, 2 types of resin cement (with or without methacryloyloxydecyl dihydrogen phosphate [MDP]) were used. SBS testing was performed. Topographic changes of the etched Y-TZP surface were analyzed using scanning electron microscopy and atomic force microscopy. The results were analyzed and compared using 2-way analysis of variance.RESULTS: Regardless of the type of resin cement, the highest bond strength was measured in the SE group, with significant differences compared to the other groups (p < 0.05). In all groups, MDP-containing resin cement yielded significantly higher bond strength values than MDP-free resin cement (p < 0.05). It was also shown that the Y-TZP surface was etched by the SE solution, causing a large change in the surface topography.CONCLUSIONS: Bond strength significantly improved when a heated HA-based SE solution was applied to the Y-TZP surface, and the etched Y-TZP surface was more irregular and had higher surface roughness.

Effect of hydrofluoric acid concentration and thermal cycling on the bond strength of brackets to ceramic

Abstract This study to evaluate the effects of different hydrofluoric acid (HF) concentrations and thermal cycling on the shear bond strength (SBS) of brackets to ceramic. Cylinders of ceramic were divided into 10 groups (n=15), according to HF concentrations: 1-1%;2-2.5%;3-5%;4-7.5%;5-10% (storage 24 h); 6-1%;7-2.5%;8-5%;9-7.5%; and, 10-10% (thermal cycling). All cylinders were etched for 60s and received one layer of silane. Metallic brackets were bonded to the cylinders using Transbond-XT, light activated for 40 s, using a LED (Radii Plus) and stored in deionized water at 37o C for 24h. The groups 6 to 10 were submitted to thermal cycling (7,000 cycles - 5o/55oC). SBS was performed in an Instron at crosshead speed of 1.0 mm/min. Data were submitted to two-way ANOVA and Tukey's post-hoc test (α=0.05). The Adhesive Remaining Index (ARI) was evaluated at 40x magnification. The different HF acid concentrations influenced on the SBS of the brackets to ceramic (p<0.05). The thermal cycling decreased the SBS of the brackets to ceramic for all acid concentrations (p<0.05). The ARI showed a predominance of scores 0 for all groups, with an increase in scores 1, 2 and 3 for the group storage for 24 h. In conclusion, the different HF acid concentrations 5.0%, 7.5% and 10% influenced on the SBS of brackets to ceramic. The thermal cycling decreased significantly the SBS of brackets to ceramic.

Resumo Este estudo avaliou os efeitos de diferentes concentrações de ácido hidrofluorídrico (HF) e ciclagem térmica na resistência de união ao cisalhamento (RUC) de bráquetes metálicos a cerâmica. Cilindros da cerâmica feldspática foram divididos em 10 grupos (n=15). De acordo com as concentrações do ácido HF: 1-1%;2-2,5%;3-5%;4-7,5%; e, 5-10% (armazenagem por 24 h); 6-1%;7-2,5%;8-5%;9-7,5%; e, 10-10% (ciclagem térmica). Todos os cilíndros foram condicionados por 60s e receberam uma camada de silano. Bráquetes metálicos foram colados aos cilíndros usando o transbond-XT, fotoativado por 40 s, usando o LED (Radii Plus; SDI) e armazenados em água deionizada a 37o C por 24 h. Os Grupos 6 a 10 foram submetidos à ciclagem térmica (7.000 ciclos - 5o/55oC). RUC foram realizadas na Instron a velocidade de 1.0 mm/min. Os dados foram submetidos à análise de variância dois-fatores e ao teste de Tukey's post-hoc (α=0,05). O Índice de Remanescente do Adesivo (IRA) foi avaliado com 40x de aumento. As diferente concentrações do ácido HF influenciou na RUC dos bráquetes na cerâmica (p<0,05). A ciclagem térmica diminuiu a RUC dos bráquetes na cerâmica para todas as concentrações do ácido (p<0,05). O IRA mostrou predominância de escores 0 para todos os grupos, com aumento de escores 1, 2 e 3 para os grupos armazenados por 24 h. Concluíndo, as concentrações do ácido HF 5,0%, 7,5% e 10% influenciaram na RUC de braquetes à cerâmica. A ciclagem térmica diminuiu significativamente a RUC do bráquetes à cerâmica.

Effect of self-etching primer associated to hydrofluoric acid or silane on bonding to lithium disilicate

Abstract To evaluate the effect of combining 5% hydrofluoric acid (HF) and silane (SI) with the self-etching ceramic primer on the immediate and after 1-year of water storage on bonding efficacy, conditioning pattern (CP) and chemical interaction (CI) to the lithium disilicate. A total of 16 CAD/CAM blocks of lithium disilicate (LD) were cut into four square sections (n=64). For bonding efficacy evaluation, the LD specimens were divided into 4 groups (n=10): 1) HF+SI; 2) self-etching ceramic primer (MEP); 3) HF+MEP; 4) MEP+SI. After each treatment, an adhesive system was applied and Tygon matrices were filled with a dual-cured resin cement followed by light curing. Cylinder specimens (0.8 mmx0.5mm) were stored in water (37 °C for 24 h or 1-year) and submitted to the μSBS test (2-way ANOVA and Tukey's test; a=0.05). CP and CI were only evaluated qualitatively. No significant difference on the μSBS was observed between groups (p=0.73), but reduced μSBS was observed after 1-year of water storage (p>0.0001). After application of HF+SI and MEP, reduction in a number of siloxane bonds was observed, suggesting the coupling of SI on the LD surface. HF or HF+MEP produced a higher dissolution of the glassy matrix than the use of MEP alone. The MEP can be an alternative to traditional ceramic treatment once the chemical interaction and long-term bond strength were similar between both groups. The association of hydrofluoric acid or silane with a self-etching ceramic primer did not add any benefits in terms of chemical interaction and bonding stability.

Resumo Avaliar o efeito da combinação de ácido fluorídrico ou silano com o primer autocondicionante de cerâmicas sobre a eficácia da união imediata e após 1 ano de armazenamento em água, padrão de condicionamento e interação química desses tratamentos com o dissilicato de lítio. Um total de 16 blocos CAD/CAM de dissilicato de lítio (DL) foram cortados em quatro seções quadradas (n=64). Os espécimes de DL foram divididos em 4 grupos: 1) ácido fluorídrico a 5% + silano (HF + SI); 2) primer autocondicionante de cerâmica (MEP); 3) HF + MEP; 4) MPE + SI. Após cada tratamento, o sistema adesivo foi aplicado e as matrizes Tygon foram preenchidas com cimento resinoso dual (Variolink® II), seguido de fotopolimerização. Espécimes em forma de cilindro (0.8 mmÆ x 0.5 mm), foram armazenados em água (37 °C por 24h ou 1 ano) e submetidos ao teste μSBS (ANOVA dois fatores e teste de Tukey; a=0,05). Para avaliação das interações químicas por Espectroscopia Raman, os espécimes de DL foram divididos em 3 grupos (n=4): 1) sem tratamento (DL); 2) HF + SI; e 3) MEP. Para avaliação do padrão de condicionamento da superfície cerâmica após os tratamentos por MEV, os espécimes de DL foram divididos em 3 grupos (n=3): 1) DL; 2) HF; 3) MEP; e 4) HF + MEP. Ambos os métodos foram avaliados apenas qualitativamente. Não foi observada diferença significativa na μSBS imediata entre os grupos (p=0,73), mas após 1 ano de armazenamento das amostras em água, reduziu μSBS (p>0,0001). HF ou HF + MEP produziram uma maior dissolução da matriz vítrea do que o uso de MEP sozinho. Após a aplicação de SI e MEP, observou-se redução de ligações de siloxano, sugerindo o acoplamento da camada de silano na superfície do DL. O primer autocondicionante cerâmico pode ser uma alternativa ao tratamento cerâmico tradicional, uma vez que a interação química e a resistência de união a longo prazo, quando comparada ao tratamento tradicional foram estatisticamente semelhantes. A associação de ácido fluorídrico ou agente de acoplamento silano com um primer autocondicionante de cerâmicas não agregou nenhum benefício em termos de interação química e estabilidade.

Influence of surface treatments in flexural strength and superficial topography of a lithium disilicate ceramic / Influência dos tratamentos de superfície na resistência à flexão e na topografia superficial de uma cerâmica de dissilicato de lítio

Objective: The aim of the study was to evaluate the influence of different surface post-etching treatments in flexural strength, contact angle and surface roughness of a lithium disilicate ceramic. Material and Methods: 60 bars (16 x 2 x 4 mm) were divided in six groups (n=10): C, no treatment; HF, hydrofluoric acid for 20 s (HF) + washing (60 s), drying (30s); HFL, HF + washing (60 s), drying (30 s) and luting; HFNL, HF + washing (60 s) + neutralization with sodium bicarbonate (SB) for 40 s + washing (5s), drying (30 s) and luting; HFUL, HF + washing (60 s) + ultrasonic bath (UB) for 4 min, drying (30 s) and luting; HFNUL, HF + washing (60 s) + SB (40 s) + UB (4 min) and luting. The bars were submitted to three-points flexural strength test. 25 ceramic blocks (12 x 7 x 7 mm) were divided into five groups (n=5) to evaluate roughness and contact angle C - no treatment; HF - HF ; HFU - HF and UB for 5 min ; HFN - HF and SB; HFNU - HF, UB and SB. A scanning electron microscope (SEM) showed the surface of the samples. ANOVA one-way statistical analysis was done for comparison of results. Results: There was no statistical difference for flexural strength (p-value = 0.15) and for surface roughness (p-valor = 0.15). However, it was obtained statistically significant difference for contact angle (p-valor = 0.00). SEM images showed precipitates after the acid etching, which were removed by post-etching treatments. Conclusion: It can be concluded that the different post-etching surface treatments did not increase the flexural strength, surface roughness, but it influenced the ceramic wetting and SEM images (AU)

Objetivo: O objetivo do estudo foi avaliar a influência de diferentes tratamentos pós-condicionamento na resistência à flexão, ângulo de contato e rugosidade superficial de uma cerâmica de dissilicato de lítio. Material e Métodos: 60 barras (16 x 2 x 4 mm) foram divididas em seis grupos (n = 10): C, sem tratamento; HF, ácido fluorídrico durante 20 s (HF) + lavagem (60 s), secagem (30 s); HFL, lavagem com HF + (60 s), secagem (30 s) e cimentação; HFNL, HF + lavagem (60 s) + neutralização com bicarbonato de sódio (SB) por 40 s + lavagem (5s), secagem (30 s) e cimentação; HFUL, HF + lavagem (60 s) + banho ultrassônico (UB) por 4 min, secagem (30 s) e cimentação; HFNUL, HF + lavagem (60 s) + SB (40 s) + UB (4 min) e cimentação. As barras foram submetidas ao teste de resistência à flexão de três pontos. 25 blocos cerâmicos (12 x 7 x 7 mm) foram divididos em cinco grupos (n = 5) para avaliação da rugosidade superficial e ângulo de contato C - sem tratamento; HF - HF; HFU - HF e UB por 5 min; HFN - HF e SB; HFNU - HF, UB e SB. Um microscópio eletrônico de varredura (MEV) foi utilizado para análise da superfície das amostras. A análise estatística unidirecional ANOVA-um fator foi realizada para comparação dos resultados. Resultados: Não houve diferença estatística para a resistência à flexão (p-valor = 0,15) e para a rugosidade superficial (p-valor = 0,15). No entanto, obteve-se diferença estatisticamente significante para o ângulo de contato (p-valor = 0,00). Imagens de microscopia eletrônica de varredura mostraram a formação de precipitados após o ataque ácido, que foram removidos pelos tratamentos pós-condicionamento. Conclusão: Pode-se concluir que os diferentes tratamentos de superfície pós-condicionamento não aumentaram a resistência à flexão, rugosidade da superfície, mas influenciaram na molhabilidade da cerâmica e nas imagens em MEV.(AU)

Bond strength to ZLS ceramics at different etching times and cementation protocols after aging / Influência da cimentação e da termociclagem na resistência de união da cerâmica de silicato de lítio reforçada com zircônia

Objective: To assess the influence of 5% hydrofluoric acid etching time (ET), cementation protocol (CP), and thermal cycling (TC) aging on the microshear bond strength (µSBS) of zirconia reinforced lithium silicate ceramic (ZLS) to adhesive resin cement. Material and Methods: Ten VITA Suprinity® ceramic blocks were cut in 120 slices (1.4 mm thickness) and randomly assigned to 12 groups (n = 10) according to the combination of factors (2x3x2 design): etching time (20 or 30 s), cementation protocol (silane + universal adhesive + resin cement; universal adhesive + resin cement; silane + resin cement) and thermal cycling (cycled or no-cycled). RelyX Ceramic Primer and Scotchbond™ Universal Adhesive were used respectively as silane (S) and universal adhesive (Ua). Ceramic surface was etched, and the cementation protocol performed on the delimited bonding area. Then, resin cement (RelyX™ Ultimate Cement [Rc]) cylinders were bonded and light cured. After, specimens were stored in deionized water at 37°C for 7 days and subjected to the µSBS test. Results: Data passed the normality test and three-way ANOVA analysis showed statistical difference (p < 0.01) for isolated; double (ET/TC) (p < 0.05), and triple (p < 0.05) factor interactions. Conclusion: The combination 30s etching-Ua-Rc presented higher adhesive bond strength after thermal aging. (AU)

Objetivo: Avaliar a influência do tempo de condicionamento com ácido fluorídrico 5% (ET), protocolo de cimentação (CP), e envelhecimento por termociclagem (TC) na resistência de união ao microcisalhamento (µSBS) da cerâmica de silicato de lítio reforçada com zircônia (ZLS) ao cimento resinoso adesivo. Material e Método: Dez blocos da cerâmica VITA Suprinity® foram cortados e 120 fatias (com espessura de 1,4 mm) e distribuídos aleatoriamente em 12 grupos (n=10) de acordo com o fator de combinação (2x3x2): tempo de condicionamento (20 ou 30 s), protocolo de cimentação (silano + adesivo universal + cimento resinoso; adesivo universal + cimento resinoso; silano + cimento resinoso) e ciclagem térmica (ciclado ou não ciclado). RelyX Ceramic Primer e adesivo Scotchbond™ Universal foram utilizados respectivamente como silano (S) e adesivo universal (Ua). A superfície cerâmica foi condicionada e o protocolo de cimentação aplicado sobre área de cimentação delimitada. Portanto, cilindros de cimento resinoso (cimento RelyX™ Ultimate [Rc]) foram cimentados e fotopolimerizados. Após, os espécimes foram armazenados em água deionizada a 37°C por 7 dias e submetidos ao teste de µSBS. Resultados: Após teste de normalidade, os dados foram analisados pelo teste ANOVA três critérios mostrando diferença estatística (p < 0.01) para a análise do fator isolado; para a interação entre dois fatores (ET/TC) (p < 0.05), e interação entre os três fatores (p < 0.05). Conclusão: A combinação 30s de condicionamento-Ua-Rc apresentou a maior resistência de união adesiva após a ciclagem térmica.(AU)

Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics

Abstract: The objective of this study was to evaluate the effect of the hydrofluoridric acid (HF) concentration and time of acid conditioning on bond strength of three glass ceramics to a resin cement. Thus, fifty blocks (10 mm x 5 mm x 2 mm) of each ceramic (LDCAD: IPS e.max CAD; LCAD: IPS Empress CAD and LDHP: IPS e.max Press) were made and embedded in acrylic resin. The surfaces were polished with sandpaper (#600, 800, 1000, and 1200 grits) and blocks were randomly divided into 15 groups (n = 10) according to the following factors: Concentration of HF (10% and 5%), conditioning time (20 s and 60 s) and ceramic (LDCAD, LDHP, and L). After conditioning, silane (Prosil / FGM) was applied and after 2 min, cylinders (Ø = 2 mm; h = 2 mm) of dual resin cement (AllCem / FGM) were made in the center of each block using a Teflon strip as matrix and light cured for 40 s (1,200 mW/cm2). Then, the samples were thermocycled (10,000 cycles, 5/55°C, 30s) and submitted to the shear bond test (50 KgF, 0.5 mm/min). The data (MPa) were analyzed with 3-way ANOVA and Tukey's test (5%). Failure analysis was performed using a stereomicroscope (20x) and a scanning electron microscope (SEM). ANOVA revealed that the "concentration" factor (p = 0.01) and the interaction "acid concentration X ceramic" (p = 0.009) had a significant effect, however, the "ceramic" (p = 0.897) and "conditioning time" (p = 0.260) factors did not influence the results. The LDHP10%60s (10.98 MPa)aA* group presented significantly higher bond strength than LDHP10%20s (6.57 MPa)bA, LCAD5%20s (6,90 ±3,5)aB and LDHP5%60s (5.66 ± 2,9MPa)aA* groups (Tukey). Failure analysis revealed that 100% of specimens had mixed failure. In conclusion, etching with 5% HF for 20 seconds is recommended for lithium disilicate and leucite-reinforced CAD/CAM ceramics. However, for pressed lithium disilicate ceramic, 10% HF for 60 s showed significantly higher bond strength to resin cement.

Caracterização interna de materiais restauradores indiretos com diferentes condicionamentos de superfície / Internal characterization of indirect restorative materials with different surface etching protocols

Objetivo: O objetivo do estudo foi avaliar o efeito da aplicação de ácido fluorídrico com diferentes tempos e concentrações na superfície de materiais restauradores indiretos obtidos a partir de blocos utilizados na tecnologia CAD-CAM. Materiais e Métodos: Amostras dos materiais restauradores indiretos medindo 4x4x0,8mm foram obtidos a partir de blocos CAD para cada material estudado: resina nanocerâmica Lava Ultimate (3M Espe), monossilicato de lítio reforçado por zircônia Celtra Duo (Dentsply) e cerâmica híbrida Vita Enamic (Vita). Os materiais foram submetidos à aplicação de ácido fluorídrico com concentração de 5% ou 10%, sendo o mesmo aplicado pelos tempos de 20, 40, 60 ou 90 segundos. Um grupo controle para cada material foi avaliado, sem nenhum tratamento de superfície, contabilizando nove grupos de cada material (n=10). As amostras foram avaliadas em relação à rugosidade de superfície (Ra e Rz), avaliadas em microscopia óptica confocal; ângulo de contato (θ), energia de superfície (s) e energia livre total de interação (∆G) avaliados em goniômetro, e resistência de união ao cimento resinoso avaliada através do teste de microcisalhamento. Imagens das amostras foram obtidas em microscopia eletrônica de varredura (MEV), microscopia óptica confocal e microscopia de força atômica. Os dados de rugosidade de superfície, ângulo de contato, energia de superfície, energia livre total de interação e resistência de união foram submetidos à ANOVA dois fatores e teste de Tukey (p<0,05). Resultados: Os resultados mostraram que, de maneira geral, o monosilicato de lítio reforçado por zircônia Celtra Duo apresentou melhores resultados quando submetido ao condicionamento com ácido fluorídrico 10% por 40 ou 60 segundos de aplicação. A resina nanocerâmica Lava Ultimate apresentou melhor performance quando condicionada com ácido fluorídrico 10% por 20 ou 40 segundos, enquanto que a cerâmica híbrida Vita Enamic apresentou melhores resultados quando condicionada com ácido fluorídrico 5% por 90 segundos. Conclusão: Cada material interagiu de maneira diferente ao condicionamento com ácido fluorídrico, sendo que o conhecimento do adequado protocolo para cada material é essencial para garantir melhorias nos processos de adesão e durabilidade das restaurações indiretas. Celtra Duo apresentou de maneira geral propriedades mecânicas superiores aos demais. Relevância clínica: Recomenda-se protocolos específicos de tratamento de superfície com ácido fluorídrico de acordo com a composição de cada material restaurador indireto(AU)

Purpose: The aim of this study was to evaluate the effect of different times and concentration of hydrofluoric acid etching on the surface of indirect restorative materials obtained from blocks used in CAD-CAM technology. Methods and Materials: Samples of indirect restorative materials measuring 4x4x0.8mm were obtained for each restorative material studied: Lava Ultimate nanoceramic resin (3M Espe), Celtra Duo zirconia-reinforced lithium silicate ceramic (Dentsply) and Vita Enamic polymer-infiltrated ceramic-network material (Vita). The materials were submitted to etching with 5% or 10% hydrofluoric acid for 20, 40, 60 or 90 seconds. A control group for each material was evaluated without any surface treatment, totaling nine experimental groups for each material (n = 10). The samples were evaluated in relation to surface roughness (Ra and Rz), evaluated by confocal optical microscopy; contact angle (θ), surface energy (s) and total free interaction energy (∆G) evaluated by goniometer; and microshear bond strength to resin cement. Sample images were obtained by scanning electron microscopy (SEM), confocal optical microscopy and atomic force microscopy. Data of surface roughness, contact angle, surface energy, total free interaction energy and bond strength were submitted to two-way ANOVA and Tukey test (p<0.05). Results: The results showed that, in general, the Celtra Duo zirconia-reinforced lithium silicate ceramic showed better results when subjected to etching with 10% hydrofluoric acid for 40 or 60 seconds. Lava Ultimate nanoceramic resin showed better performance when etched with 10% hydrofluoric acid for 20 or 40 seconds, while Vita Enamic polymer-infiltrated ceramic-network showed better results when etched with 5% hydrofluoric acid for 90 seconds. Conclusion: Each material showed different characteristics after etching with hydrofluoric acid, and the knowledge of the proper protocol for each material is essential to ensure improvements in the adhesion process and durability of indirect restorations. Celtra Duo presents general ways of mechanical properties superior to the others. Clinical relevance: Specific surface treatment protocols with hydrofluoric acid are recommended based on the different compositions of indirect restorative materials(AU)

Bond and topography evaluation of a Y-TZP ceramic with a superficial low-fusing porcelain glass layer after different hydrofluoric acid etching protocols / Avaliação da adesão e topografia de uma zircônia Y-TZP com uma camada de glaze após diferentes protocolos de condicionamento com ácido fluorídrico

Introduction: Despite being one of the most studied ceramics today, zirconia still does not have a well-defined adhesion protocol. Objective: Evaluate the influence of different etching times and hydrofluoric acid (HF) concentrations on the zirconia surface and bond strength between a vitrified Y-TZP ceramic and a resin cement. Materials and method: The zirconia surface treatments were: sandblasting with silica-coated alumina (Co); glaze application + 5% HF etching for 5s (G5-5s), 10s (G5-10s) or 20s (G5-20s); glaze application + 10% HF etching for 5s (G10-5s), 10 (G10-10s) or 20s (G10-20s) . Then, cement cylinders (3.3 × 3.3 mm) were built up for shear bond test on all specimens. The specimens were subjected to 6000 thermal cycling before the test. Fractures were analyzed by stereomicroscope. Data were statistically analyzed by Kruskal-Wallis and Dunn statistical tests (5%). Extra samples of each group were made to obtain profilometry and scanning electron microscopy (SEM). Result: Zirconia-cement bond strength was affected by the ceramic surface treatments (p = 0.001). G10-5s (2.71 MPa) recorded the highest bond strength values, followed by the Co (2.05 MPa) while G5 groups had the lowest bond value. Adhesive failure of the samples predominated. The image analysis revealed G5 groups seem to have a lower roughness when compared to groups treated by 10% HF. The creation of pores in the low-fusing porcelain glass layer surface occurred only when 10% HF was used. Conclusion: The low-fusing porcelain glass layer application was able to overcome the sandblasting and obtain a greater adhesive bond to the resinous cement, however, only when 10% HF was used for an interval of 5 seconds.

Introdução: Apesar de ser uma das cerâmicas mais estudadas atualmente, a zircônia ainda não possui um protocolo bem definido para uma cimentação adesiva. Objetivo: Avaliar a influência de diferentes tempos de condicionamento e concentrações do ácido fluorídrico (AF) na superfície da zirconia e na resistência de união entre uma cerâmica Y-TZP vitrificada e um cimento resinoso. Material e método: Os tratamentos de superfície foram: jateamento com óxido de alumínio revestido com sílica (Co); aplicação de glaze + condicionamento com AF 5% por 5s (G5-5s), 10s (G5-10s) ou 20s (G5-20s); aplicação de glaze + condicionamento com AF 10% por 5s (G10-5s), 10 (G10-10s) ou 20s (G10-20s). Em seguida, cilindros de cimento (3,3 × 3,3mm) para teste de cisalhamento foram feitos em todos os espécimes. Os espécimes foram submetidos a 6000 ciclos térmicos antes do teste de adesão. As fraturas foram analisadas por estereomicroscópio. Os dados foram analisados ​​estatisticamente por Kruskal-Wallis e Dunn (5%). Amostras extra de cada grupo foram feitas para realização de perfilometria e microscopia eletrônica de varredura (MEV). Resultado: A resistência de união zircônia-cimento foi afetada pelos tratamentos de superfície (p = 0,001). Os grupos G10-5s (2,71 MPa) registraram os maiores valores de resistência de união, seguidos pelos Co (2,05 MPa), enquanto os grupos G5 apresentaram o menor valor de união. Falhas adesivas foram predominantes. As análises por imagem revelaram que os grupos G5 parecem ser menos rugosos quando comparados aos grupos tratados com AF 10%. A criação de poros na superfície vítrea (glaze) ocorreu apenas quando foi utilizado AF 10%. Conclusão: A aplicação de camada de vidro de porcelana de baixa fusão foi capaz de superar o jateamento e obter uma maior adesão adesiva ao cimento resinoso, no entanto, somente quando foi utilizado 10% de HF por um intervalo de 5 segundos.

Toxicidad por ácido fluorhídrico: reporte de casos / HYdrofluoric acid toxicity

Los accidentes con ácido fluorhídrico en Argentina son un motivo de consulta infrecuente, a pesar de ser utilizado en varias actividades laborales. Es uno de los pocos cáusticos con tratamiento específico que se debe tener en cuenta. Reportamos el caso de un paciente de 35 años que estuvo en contacto con esta sustancia con posterior compromiso de miembro superior, presentando placa eritematosa en región palmar derecha y lesión ampollar con descamación posterior y sangrado en lecho ungueal. Recibió tratamiento local con gluconato de calcio al 20% en toda la extensión de la zona afectada durante 48 hs con recuperación completa a los quince días. La sospecha clínica temprana y la administración adecuada de gluconato de calcio evitan lesiones de mayor grado y extensión

In Argentina, hydrofluoric acid accidents are a rare reason for consultation, despite being a commonly used substance in laboral activities. It is one of the few caustics with a specific treatment that must be taken into account. We report the case of a 35 year old patient affected by said substance, in which we observe an impairment of the upper limb, presenting on the right palmar region, an erythematous plaque with a blister lesion with posterior scaling and bleeding of the nail bed. The importance of the early clinical suspicion and the proper administration of calcium gluconate would avoid bigger and more extensive lesions

Adhesion to a lithium disilicate glass ceramic etched with hydrofluoric acid at distinct concentrations

Abstract This study evaluated the effect of different hydrofluoric acid (HF) concentrations on the bond strength between a lithium disilicate-based glass ceramic and a resin cement. Eighty ceramic-blocks (12×7×2 mm) of IPS e.Max CAD (Ivoclar Vivadent) were produced and randomly assigned to 8 groups, considering 2 study factors: HF concentration in 4 levels, i.e., 1% (HF1), 3% (HF3), 5% (HF5), and 10% (HF10), and storage in 2 levels, i.e., baseline (tests were performed 24 h after cementation), and aged (storage for 150 days + 12,000 thermal-cycles at 5°C and 55°C). Acid etching (20 s) was performed, followed by washing, drying, and silanization. Four resin cement cylinders (ϕ= 0.96 mm) were built-up from starch matrices on each ceramic sample (n= 40). Additional ceramic samples were etched and analyzed for contact angle, micro-morphology, and roughness. In baseline condition (without aging), the HF3, HF5, and HF10 groups showed similar bond strength values (13.9 - 15.9 MPa), and HF1 (11.2 MPa) presented lower values than HF5, being that statistically different (p= 0.012). After aging, all the mean bond strengths statistically decreased, being that HF3, HF5, and HF10 (7.8 - 11 MPa) were similar and higher than HF1 (1.8 MPa) (p= 0.0001). For contact angle, HF3, HF5, and HF10 presented similar values (7.8 - 10.4°), lower than HF1 and CTRL groups. HF5 and HF10 presented rougher surfaces than other conditions. For better bond strength results, the tested ceramic may be etched by HF acid in concentrations of 3%, 5%, and 10%.

Resumo Este estudo avaliou o efeito de diferentes concentrações de ácido fluorídrico (HF) na resistência de união entre uma cerâmica vítrea à base de dissilicato de lítio e um cimento resinoso. Oitenta blocos cerâmicos (12×7×2 mm) de IPS e.Max CAD (Ivoclar Vivadent) foram produzidos e distribuídos aleatoriamente em 8 grupos, considerando 2 fatores de estudo: concentração de HF em 4 níveis, isto é, 1% (HF1), 3% (HF3), 5% (HF5), e 10% (HF10), e armazenamento em 2 níveis, isto é, condição inicial (testes foram realizados 24 h após a cimentação), e envelhecidos (150 dias de armazenamento + 12.000 ciclos térmicos a 5°C e 55°C). Condicionamento ácido (20 s) foi realizado, seguido por lavagem, secagem e silanização. Quatro cilindros de cimento resinoso (ϕ= 0.96 mm) foram construídos a partir de matrizes de amido em cada amostra cerâmica (n= 40). Amostras cerâmicas adicionais foram condicionadas e analisadas quanto ao ângulo de contato, micro-morfologia e rugosidade. Na condição inicial (sem envelhecimento), os grupos HF3, HF5, e HF10 mostraram valores de resistência de união similares (13.9 - 15.9 MPa), e HF1 apresentou valores menores que HF5, sendo estatisticamente diferente (p= 0.012). Após o envelhecimento, todas as médias de resistência de união diminuíram estatisticamente, sendo que HF3, HF5 e HF10 foram similares e maiores que HF1 (p= 0.0001). Para o ângulo de contato, HF3, HF5 e HF10 apresentaram valores similares (7.8 - 10.4°), menores que os grupos HF1 e CTRL. HF5 e HF10 apresentaram superfícies mais rugosas que as outras condições. Para melhores resultados de resistência de união, a cerâmica testada pode ser condicionada com ácido fluorídrico nas concentrações de 3%, 5% e 10%.

Alternativas de tratamientos de superficie para adhesión de cerámica de disilicado de litio / Alternatives of surface treatments for adhesion of lithium disilicate ceramics

Introduction: the clinical success of a restoration is strongly associated with the quality and durability of the ceramic-cement resin interface. In order to obtain an adequate union between these materials of different nature surface treatments are used and achieve mechanical retention or chemical interaction. Objectives: to check if any method promotes a true chemical bond between lithium disilicate ceramics and resin cement. As well as determineif there is any treatment that reports bonding values comparable to hydrofluoric acid and silane (gold standard). Methods: a systematic literature review was developed based on the PRISMA strategy, where the databases were searched: Science Direct, Pubmed (MEDLINE), EMBASE, Springer Journal, SciELO with MeSH and free terms from 2005 to November 2016 for articles in English and Spanish on surface treatments for lithium disilicate. Results: from 58 publications selected a sample of 21 articles. Two articles reported high risk of bias. Conclusions: hydrofluoric acid and silane continue to be the method with the highest and most reliable adhesion values in the literature. Universal adhesives are an alternative to promote chemical adhesion additional to the silane. Diamond burs, Nd: YAG and Er: YAG laser are not recommended as surface treatments(AU)

Introducción: el éxito clínico de una restauración se asocia fuertemente a la calidad y duración de la interface cerámica-cemento resinoso. Para que exista una adecuada unión entre estos materiales de distinta naturaleza se emplean tratamientos de superficie para lograr una buena retención mecánica o interacción química. Objetivos: revisar si algún método promueve una verdadera adhesión química entre la cerámica de disilicato de litio y el cemento resinoso, así como determinar si existe algún tratamiento que reporte valores de unión comparables al ácido fluorhídrico y silano (patrón de oro). Métodos: se desarrolló una revisión sistemática de literatura basada en la estrategia PRISMA, donde se buscó en las bases de datos: Science Direct, Pubmed (MEDLINE), EMBASE, Springer Journal, SciELO con términos MeSH y libres desde el 2005 a noviembre de 2016 para artículos en inglés y español sobre tratamientos de superficie para disilicato de litio. Resultados: de 58 publicaciones, se seleccionó una muestra de 21 artículos. Dos artículos reportaron riesgo de sesgo alto. Conclusiones: el ácido fluorhídrico y silano continúan siendo el método con los valores de adhesión más altos y confiables de la literatura. Los adhesivos universales son una alternativa para promover adhesión química adicional al silano. Fresas diamantadas, laser Nd: YAG y Er:YAG no se recomienda como tratamientos de superficie(AU)

Mechanical Properties and Microstructure of the Leucite-Reinforced Glass-Ceramics for Dental CAD/CAM / 치위생과학회지

The computer-aided design/computer-aided manufacturing (CAD/CAM) system was introduced to shorten the production time of all-ceramic restorations and the number of patient visits. Among these types of ceramic for dental CAD/CAM, they have been processed into inlay, onlay, and crown shapes using leucite-reinforced glass-ceramics to improve strength. The purpose of this study was to observe the mechanical properties and microstructure of leucite-reinforced glass-ceramics for dental CAD/CAM. Two types of leucite-reinforced glass-ceramic blocks (IPS Empress CAD, Rosetta BM) were prepared with diameter of 13 mm and thickness of 1 mm. Biaxial flexural testing was conducted using a piston-on-three-ball method at a crosshead speed of 0.5 mm/min. Weibull statistics were used for the analysis of biaxial flexural strength. Fracture toughness was obtained using an indentation fracture method. Specimens were observed by field emission scanning electron microscopy to examine the microstructure of the leucite crystalline phase after acid etching with 0.5% hydrofluoric acid aqueous solution for 1 minute. The results of strength testing showed that IPS Empress CAD had a mean value of 158.1±8.6 MPa and Rosetta BM of 172.3±8.3 MPa. The fracture toughness results showed that IPS Empress CAD had a mean value of 1.28±0.19 MPa·m(1/2) and Rosetta BM of 1.38±0.12 MPa·m(1/2). The Rosetta BM sample exhibited higher strength and fracture toughness. Moreover, the crystalline phase size and ratio were increased in the Rosetta BM sample. The above results are expected to elucidate the basic mechanical properties and crystal structure characteristics of IPS Empress CAD and Rosetta BM. Additionally, they will help develop leucite-reinforced glass-ceramic materials for CAD/CAM.